YIZHAO

StepOperationCriterionStep 1: Check CompressorRead the output pressure gauge on the compressorBelow 0.4MPa → insufficient pressure, increase compressor output to above 0.6MPaStep 2: Check Air Hoses...

StepOperationCriterionStep 1: Check SocketTry a different socket known to be workingWorks on new socket → original socket dead or has poor contactStep 2: Check Power CordInspect both plugs for loos...

StepOperationCriterionStep 1: Multi-Point Temperature CheckUse infrared thermometer to measure left, center, right, top, and bottom of heating plateTemperature difference exceeds 10℃ → heating plat...

StepOperationCriterionStep 1: Lower TemperatureReduce temperature by 10-20℃ and retryColors return to normal → original temperature was too highStep 2: Shorten TimeReduce time by 5-10 secondsNo mor...

StepOperationCriterionStep 1: Check PressurePress down on garment after plate engagement, feel if pressure is evenEdges noticeably looser than center → insufficient or uneven pressure, tighten pres...

StepOperationCriterionStep 1: Check Actual TemperaturePoint infrared thermometer at center of heating plate, compare with displayOver 5℃ difference → thermostat drift, contact manufacturer for repa...